TK Royal – Tone Match Gen2 Presets and Captures

Description

Scroll down to see more playing samples for each unit

TONE MATCH Gen2 PATCHES, CAPTURES, AND PROFILES OF OUR TONE KING ROYALIST MK III

For these patches, we’ve captured a Tone King Royalist Mk III. The result is a set of presets and captures that sound exactly like our amp, and the microphones, preamps, and EQ chains that we use to record it.

The Royalist is a British (Marshall) inspired amplifier, capable of a huge range of classic tones from the lush vintage cleans of a JTM45 to the aggressive rhythm tones of a 100 watt Plexi. The Royalist has three voices, or channels, switchable from ’64 (JTM45), ’67 (JMP), and ’70 (Plexi). What we love about the amp is that it excels in the clean, high headroom type of Marshall sounds, while also delivering awesome gained up rhythm tones.

We’ve captured and tone-matched the amp through a Mojotone Bluesbreaker 2×12 cab using a Royer 121 and Earthworks SR25 through a stereo Neve 1073 preamp.

TONE MATCH (Gen 2) PATCHES (Applies to Line 6 and Fractal presets)

These are part of our ‘Tone Match’ line of patches. To create these patches, we make custom IR’s that ‘match’ the HX and Fractal amp models to our real-world amp. The result is the Line 6 and Fractal units sound almost exactly like our actual amplifiers.

The ‘Gen2’ indicates a new process we’ve used when Tone Matching our amplifiers that takes more of the amplifier’s cab and speaker into account, resulting in a more accurate tone match impulse response.

PRESETS INFO

(Applies to Line 6 HX, Fractal, and Quad Cortex units)

The pack includes 2 sets of presets (each with SC and HB options). The presets feature different approaches to signal chain and/or amp channels.

A PRESET: The ‘A’ presets feature the ’64’ (JTM45) voice, and feature two amp blocks set up in a stereo pair with all the wet effects feeding into the amps. Think of it like running a large stereo pedalboard into two Royalist amplifiers set clean.

B PRESET: The ‘B’ presets allow to you channel switch the amp. To do this, we’ve set up two amp blocks – the ’64 (JTM45) and ’70 (PLEXI) voicings, and we’ve given you a foot switch that allows you to switch between the amp blocks. This lets you go from a clean tone to an aggressive rhythm tone, all through the amp blocks. In the ‘B’ presets, the modulation, delay, and reverb effects are placed after the amplifier blocks.

SNAPSHOTS/SCENES

Our presets include Snapshots for instant access to a wide variety of tones, including clean sounds, ambient tones, driven, lead, and high gain sounds, and modulated tones.

NOTES:

• The HX Stomp, POD Go, and FM3 folders include ‘FX” presets. These presets include the additional effects blocks from the full Helix/Axe-FX versions. Because these units have signal flow and DSP limitations, they are not as fully featured as the flagship units.
• HX Stomp includes both the ‘A’ and ‘B’ presets, while POD Go includes a ‘JTM’ preset based on the 64 voice and a ‘PLEXI’ preset based on the 70 voice.
• The HX Stomp presets do not include Snapshots.

CAPTURES & PROFILES

(Applies to TONEX, Quad Cortex, and Kemper units)

The captures increase through the entire gain range of the amp for all three voices (64, 67, and 70)

The Tone Model presets are numbered, and the number corresponds to the level of gain in the tone model. Lower numbers equal lower gain, and higher numbers equal higher gain. Typically a ‘2’ or ‘3’ is the ‘edge of breakup’, and is the perfect option to use with pedals

You get a total of 12 captures

QUAD/NANO CORTEX – HOW DO YOU GET THE CAPTURES?

When you place your order, we will need to manually send you the captures through the ‘Cortex Cloud’ app by Neural DSP, available for both iOS and Android devices. First, you need to have the app installed and you must have an account through the app (go here to create an account and access the app).

This is how we will send you the captures:

1. Please include your Cortex Cloud app username in the ‘Notes’ field when checking out. If you do not include this, we cannot send you the captures. After we receive your order, we (SignalTheory) will follow you on the app.
2. Follow ‘SignalTheory’ on the Cortex Cloud app. This will make us ‘friends’ through the app :). If you are not following us, we cannot send you the captures.
3. After we receive your order, and we ‘Friends’ on the app, we will send you the captures through the app. We bundle the captures into presets, so you will receive one (or more) presets that include all the captures. You will find the captures in the ‘Shared with me’ section on your Quad Cortex.
4. Please allow up to 5 business days for us to send you the captures. Most orders will be fulfilled within two business days or less. This fulfillment process must happen manually – we will do our best to get you the files quickly. Once the NDSP marketplace opens, this process may change.