MATCH CHIEF – Tone Match Gen2 Presets and Captures

Description

TONE MATCH PATCHES, CAPTURES, AND PROFILES OF OUR MATCHLESS CHIEFTAIN

For these presets, we have captured our Matchless Chieftain. The result is set of presets and captures that sound exactly like our amp, and the microphones, preamps, and EQ chains that we use to record it.

The Chieftain has the chime and clarity of an AC style amplifier, but gets very Marshall-like when you increase the gain. You could think of it as a boutique AC-30 type circuit with a bit of Marshall rock thrown in when it counts :).

We’ve captured the amp with a Royer 121 and Earthworks SR25 through a stereo Neve 1073 preamp.

TONE MATCH (Gen 2) PATCHES (Applies to Line 6 and Fractal presets)

These are part of our ‘Tone Match’ line of patches. To create these patches, we make custom IR’s that ‘match’ the HX and Fractal amp models to our real-world amp. The result is the Line 6 and Fractal units sound almost exactly like our actual amplifiers.

The ‘Gen2’ indicates a new process we’ve used when Tone Matching our amplifiers that takes more of the amplifier’s cab and speaker into account, resulting in a more accurate tone match impulse response.

PRESETS INFO

(Applies to Line 6 HX, Fractal, Quad Cortex, Headrush Prime)

The pack includes fully featured presets designed for both single coil and humbucker equipped guitars.

SNAPSHOTS/SCENES

Our presets include Snapshots for instant access to a wide variety of tones, including clean sounds, ambient tones, driven, lead, and high gain sounds, and modulated tones.

NOTES:

• The HX Stomp, POD Go, and FM3 folders include ‘FX” presets. These presets include the additional effects blocks from the full Helix/Axe-FX versions. Because these units have signal flow and DSP limitations, they are not as fully featured as the flagship units.
• AM4 presets include ‘Block Library’ files to give you access to dozens of different effects, all perfectly dialed in
• The HX Stomp presets do not include Snapshots.
• Headrush Prime downloads include amp clone(s)

CAPTURES & PROFILES

(Applies to TONEX, Quad Cortex, and Kemper units)

The captures increase through the entire gain range of the amp for both channels.

The captures are numbered, and the number corresponds to the level of gain in the tone model. Lower numbers equal lower gain, and higher numbers equal higher gain. Typically a ‘2’ or ‘3’ is the ‘edge of breakup’, and is the perfect option to use with pedals

You get a total of 4 captures for Kemper and Quad Cortex. TONEX includes direct captures for a total of 8

TONEX Captures:

These captures were created using the ‘V2’ capture process, which was introduced with Tonex Ver. 1.10. This means that these captures represent the highest possible level of accuracy, and are phase aligned with all other ‘V2’ captures.

Capture Labels:

• ESS = Matchless ESS112 1×12 cab with a Matchless/Celestion G12H30
• Dir = Direct (no cab)

QUAD/NANO CORTEX – HOW DO YOU GET THE CAPTURES?

When you place your order, we will need to manually send you the captures through the ‘Cortex Cloud’ app by Neural DSP, available for both iOS and Android devices. First, you need to have the app installed and you must have an account through the app (go here to create an account and access the app).

This is how we will send you the captures:

1. Please include your Cortex Cloud app username in the ‘Notes’ field when checking out. If you do not include this, we cannot send you the captures. After we receive your order, we (SignalTheory) will follow you on the app.
2. Follow ‘SignalTheory’ on the Cortex Cloud app. This will make us ‘friends’ through the app :). If you are not following us, we cannot send you the captures.
3. After we receive your order, and we ‘Friends’ on the app, we will send you the captures through the app. We bundle the captures into presets, so you will receive one (or more) presets that include all the captures. You will find the captures in the ‘Shared with me’ section on your Quad Cortex.
4. Please allow up to 5 business days for us to send you the captures. Most orders will be fulfilled within two business days or less. This fulfillment process must happen manually – we will do our best to get you the files quickly. Once the NDSP marketplace opens, this process may change.